Overview of Concrete Waterproofing Agent

Concrete waterproofing agents are specialized treatments applied to concrete surfaces to prevent water penetration and protect against moisture damage. These agents enhance the durability and lifespan of concrete structures by creating a barrier that repels water, thus reducing the risk of corrosion, efflorescence, and structural degradation.

Features of Concrete Waterproofing Agent

Water Repellency: Forms a hydrophobic layer that prevents water absorption.
Durability Enhancement: Increases the longevity of concrete by protecting it from moisture-related damage.
Corrosion Resistance: Protects reinforcing steel inside the concrete from corrosion caused by water and chloride ions.
Application Flexibility: Can be applied through various methods including spraying, brushing, or mixing directly into fresh concrete.
Breathability: Allows moisture vapor to escape while preventing liquid water ingress.
Chemical Stability: Resists degradation from exposure to chemicals and environmental factors.

(Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent Concrete Mortar Wall Waterproofing)

Specifications of Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent Concrete Mortar Wall Waterproofing

Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Surface Waterproofing Representative is a high-performance service for securing concrete and mortar wall surfaces from water damage. The product integrates salt methylsilicate and organic silicon compounds. These materials react with minerals in concrete to develop a water-proof layer inside pores. The fluid formula permeates deep right into surfaces. It fills up fractures and gaps. This stops water absorption while allowing the wall take a breath.

The product deals with exterior wall surfaces, porches, cellars, roofing systems, and concrete frameworks. It appropriates for new builds or old surfaces. Apply it straight making use of a brush, roller, or spray. No blending is required. One coat is enough for most situations. Drying takes 2-4 hours relying on weather. Full treating takes place in 1 day.

Key functions include solid adhesion, resistance to UV rays, and sturdiness in severe temperature levels. It protects against mold and mildew, efflorescence, and corrosion. The water resistant effect lasts over 5 years. It stays flexible to deal with structural changes without breaking. The formula is green. It consists of no harmful solvents or hefty steels.

Technical specs include a pH range of 11-13, density of 1.2-1.3 g/cm SIX, and shelf life of one year. Insurance coverage is 4-6 square meters per litre. It works finest on surfaces with temperature levels between 5 ° C and 35 ° C. The product is fire-resistant. It does not change the look of walls.

Wear gloves and goggles throughout application. Avoid call with skin or eyes. Rinse quickly if spills take place. Keep the item away from youngsters. Shop it in an amazing, completely dry area. Do not ice up. Maintain the container secured after usage. Do not use in rain or direct sunlight. Wait 24 hours prior to subjecting cured surface areas to water.

The item satisfies global construction material criteria. It is checked for water resistant performance and environmental safety. Utilize it on permeable materials like concrete, block, or rock. It is not recommended for non-absorbent surfaces like metal or glass.

(Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent Concrete Mortar Wall Waterproofing)

Applications of Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent Concrete Mortar Wall Waterproofing

Sodium methylsilicate liquid natural silicon outside wall surface waterproofing representative is a specialized option designed to safeguard concrete and mortar surfaces from water damage. This product penetrates deep right into permeable materials. It reacts with calcium hydroxide existing in cement-based substratums. A waterproof obstacle forms inside the structure. This barrier blocks water absorption while permitting wetness vapor to get away. The outcome is lasting protection against leaks, moisture, and weathering.

Contractors and professionals widely use this waterproofing representative for outside wall surfaces. It fits concrete frontages, brick masonry, and plastered surfaces. The fluid can be applied by spraying, cleaning, or rolling. It bonds chemically with the substrate. No physical film stays on the surface. This protects the original look of walls. It avoids peeling off or blistering usual with membrane-based waterproofing systems.

Concrete structures profit substantially from this treatment. Parking garages, bridges, and basements face constant direct exposure to dampness. The agent lowers water infiltration in these atmospheres. It reinforces concrete by filling microcracks. This minimizes rust dangers for ingrained steel supports. Freeze-thaw damage decreases in cool environments. Surface area durability enhances against abrasion and chemical direct exposure.

Mortar applications consist of ceramic tile joints, providing blends, and repair. Adding the fluid to mortar boosts water resistance without altering workability. It protects against efflorescence by reducing salt migration. Dealt with mortar preserves bond toughness. This is important for exterior tiles revealed to rain or humidity.

The item is eco-friendly. It contains no unpredictable organic compounds. Safe application takes place in occupied structures. No solid odors or toxic deposits stay. Upkeep comes to be easier. Reapplication is needed just after prolonged durations, normally 5-10 years depending upon weather conditions.

Cost performance makes this remedy popular. It needs minimal labor. Drying time is short. Projects proceed quicker. Structural long life lowers repair work expenditures gradually. Compatibility with many repaint systems enables seamless combination right into renovation workflows.

Company Introduction

Welcome to Footprintbooks, a leading supplier in the international market for high-quality concrete admixtures. Our extensive product range includes superplasticizers, waterproofing agents, accelerators, and more, designed to meet diverse construction needs. With cutting-edge technology and stringent quality control, we ensure our products enhance durability, workability, and sustainability of concrete structures. Committed to excellence, we serve customers across the globe, offering tailored solutions and exceptional service. Partner with us for reliable and innovative concrete admixture solutions that build the foundations of tomorrow’s world.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent Concrete Mortar Wall Waterproofing

Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent is a liquid solution. It protects concrete and mortar walls from water damage. It penetrates surfaces deeply. It creates a waterproof barrier. It is eco-friendly. It resists weather and chemicals. It is used on exterior walls, roofs, balconies, and basements.

How does this waterproofing agent work? The liquid reacts with carbon dioxide in the air. It forms a gel-like substance inside pores. This blocks water from entering. It strengthens the surface. It does not change the appearance of walls. It allows the material to breathe. Moisture inside can escape.

What surfaces can it be applied to? It works on concrete, brick, mortar, and stone. It is ideal for exterior walls. It protects against rain and humidity. It is suitable for roofs and terraces. It prevents leaks in basements. It is not recommended for flexible materials like rubber or plastic.

How is the product applied? Clean the surface first. Remove dirt and loose particles. Apply the liquid evenly with a sprayer or brush. Use two coats for best results. Wait 2-4 hours between coats. Let it dry 24 hours before exposure to water. Avoid application in rain or extreme heat. Wear gloves and goggles during use.

How long does the waterproofing effect last? The protection lasts 5-10 years. It depends on weather conditions and surface quality. Harsh climates may reduce longevity. Reapply every few years for ongoing protection. Inspect the surface annually. Repair cracks or damage before reapplying.

(Sodium Methylsilicate Liquid Organic Silicon Exterior Wall Waterproofing Agent Concrete Mortar Wall Waterproofing)