Overview of Concrete Waterproofing Agent

Concrete waterproofing agents are specialized treatments applied to concrete surfaces to prevent water penetration and protect against moisture damage. These agents enhance the durability and lifespan of concrete structures by creating a barrier that repels water, thus reducing the risk of corrosion, efflorescence, and structural degradation.

Features of Concrete Waterproofing Agent

Water Repellency: Forms a hydrophobic layer that prevents water absorption.
Durability Enhancement: Increases the longevity of concrete by protecting it from moisture-related damage.
Corrosion Resistance: Protects reinforcing steel inside the concrete from corrosion caused by water and chloride ions.
Application Flexibility: Can be applied through various methods including spraying, brushing, or mixing directly into fresh concrete.
Breathability: Allows moisture vapor to escape while preventing liquid water ingress.
Chemical Stability: Resists degradation from exposure to chemicals and environmental factors.

Specifications of Silway 715 Nano-Coating: Waterproof for Concrete, Masonry & Roads

Specifications of Silway 715 Nano-Coating: Waterproof for Concrete, Masonry & Roads

Product Overview

Silway 715 is a high-performance nano-coating made to protect concrete, masonry, and road surfaces from water damage. It forms an invisible barrier that stops water from soaking into the material. This helps prevent cracks, spalling, and other types of weather-related wear.

Key Features

Waterproofing: Silway 715 deeply penetrates porous surfaces and reacts with minerals to create a water-repellent layer. Water beads up and rolls off instead of soaking in.

Durability: The coating bonds chemically with the substrate. This means it lasts longer than surface sealers and won’t peel or flake over time.

Breathability: Unlike film-forming sealers, Silway 715 lets trapped moisture vapor escape. This reduces the risk of blistering or internal pressure build-up.

UV Resistance: The formula stays stable under sunlight. It does not yellow, degrade, or lose effectiveness when exposed to UV rays.

Easy Application: You can apply it by spray, roller, or brush. No special tools are needed. One coat is often enough for full protection.

Technical Details

Appearance: Clear, colorless liquid
Solids Content: Approximately 10% by weight
Viscosity: Similar to water
Coverage Rate: 200–400 sq. ft. per gallon (varies by surface porosity)
Dry Time: Surface dry in 30–60 minutes; full cure in 24 hours
Storage: Keep in a cool, dry place between 40°F and 90°F (4°C–32°C)

Suitable Surfaces

Use Silway 715 on driveways, sidewalks, bridges, retaining walls, brickwork, stucco, and other cement-based materials. It works best on clean, dry surfaces free of oil, paint, or sealers.

Applications of Silway 715 Nano-Coating: Waterproof for Concrete, Masonry & Roads

Applications of Silway 715 Nano-Coating: Waterproof for Concrete, Masonry & Roads

Long-Lasting Protection for Hard Surfaces

Silway 715 is a high-performance nano-coating made to protect concrete, masonry, and road surfaces from water damage. It forms an invisible shield that stops water from soaking into the material. This helps prevent cracks, spalling, and other types of wear caused by moisture.

Works on Many Types of Structures

You can use Silway 715 on driveways, sidewalks, bridges, parking lots, and building walls. It bonds tightly with porous surfaces like brick, stone, stucco, and poured concrete. The coating does not change how the surface looks—it stays breathable while blocking water.

Easy to Apply, Tough to Beat

Applying Silway 715 is simple. Just clean the surface well, then spray or roll on the product. It dries fast and needs no special tools. Once it cures, it creates a strong barrier that lasts for years. Rain, snow, and even de-icing salts won’t break it down easily.

Prevents Costly Repairs

Water is a major cause of damage to outdoor structures. When it seeps in and freezes, it expands and breaks apart the material. Silway 715 stops this cycle before it starts. By keeping water out, it reduces the need for patching, resurfacing, or full replacements.

Ideal for Both New and Old Projects

Use Silway 715 during new construction to add long-term protection from day one. You can also apply it to older surfaces to restore their resistance to weather. It works in hot or cold climates and stands up to heavy traffic and constant exposure.

This nano-coating gives you peace of mind. Your concrete and masonry stay stronger, cleaner, and safer—without changing their natural look or texture.

Company Introduction

Welcome to Footprintbooks, a leading supplier in the international market for high-quality concrete admixtures. Our extensive product range includes superplasticizers, waterproofing agents, accelerators, and more, designed to meet diverse construction needs. With cutting-edge technology and stringent quality control, we ensure our products enhance durability, workability, and sustainability of concrete structures. Committed to excellence, we serve customers across the globe, offering tailored solutions and exceptional service. Partner with us for reliable and innovative concrete admixture solutions that build the foundations of tomorrow’s world.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Silway 715 Nano-Coating: Waterproof for Concrete, Masonry & Roads

Frequently Asked Questions About Silway 715 Nano-Coating

What surfaces can Silway 715 protect?

Silway 715 works on concrete, brick, stone, and asphalt. It also protects roads, driveways, sidewalks, and building exteriors. The coating bonds well with porous materials.

How does Silway 715 keep water out?

Silway 715 uses nano-technology to fill tiny pores in the surface. This creates a barrier that blocks water but still lets vapor escape. The surface stays dry without trapping moisture inside.

Is Silway 715 safe for the environment?

Yes. Silway 715 contains no harmful solvents or VOCs. It is water-based and non-toxic after it dries. You can use it near plants, soil, and water sources without worry.

How long does the protection last?

One application lasts up to 10 years, depending on weather and wear. Heavy traffic or extreme conditions may reduce this time. Reapplication is simple when needed.

Can I apply Silway 715 myself?

Yes. Clean the surface first. Then spray, roll, or brush on Silway 715 evenly. Let it dry for 24 hours. No special tools or training are required. Just follow the instructions on the label.