Analysis of the advantages of using electric heating to conduct heat in the race label machine

(Analysis of the advantages of using electric heating to conduct heat in the race label machine)

Analysis
of the advantages of using electric heating to conduct heat in the race label
machine

At
present, energy conservation and environmental protection are advocated, and
boiler transformation is carried out. The steam heating and boiler heating methods
used in the heater of the woodworking board hot press are gradually eliminated.
Instead, most of the board factories choose the name of the electric heating
guide product, using high-temperature heat-resistant heat transfer oil as the
carrier, and forcibly closing the liquid phase circulation through electric
heating and high-temperature oil pumps to achieve the role of heating
equipment.

The
name of the electric heating product uses high-temperature heat transfer oil as
the heat transfer medium, which is heated by electric heating, and the heat
carrier is forced to circulate in the liquid phase through the high-temperature
oil pump to transfer the heat energy to the heating equipment. Temperature
probes are installed on the heat transfer oil inlet and outlet to ensure the
required temperature.

The
advantages of the electric heating race label machine are reflected in the
following aspects:

1.
The name of electric heating and heat conduction products has high efficiency
and saves energy. We all know that steam will only release heat when it reaches
the hot plate and condenses into water. At this time, if the hot water can be
recycled, part of the heat loss can be reduced. If it cannot be fully recycled,
the heat contained in the hot water will be completely wasted. According to
statistics, about 20% of the heat in steam heating is wasted. In the electric
heating heat-conducting oil furnace, the heat-conducting oil is circulated for
heating, which will not cause unnecessary heat loss, and the efficiency of the
race label machine can reach 90%, which saves energy. The race label machine
heating is achieved by heating the heat transfer oil through the heating tube
of the electric heating heat transfer oil furnace. Unlike steam heating, it
needs to be continuously exhausted to heat up, resulting in a lot of heat
waste.

2.
The race label machine has high safety and uniform temperature. In order to
meet the heating requirements of the race label machine, the boiler pressure
must be above 13 kg, while the race label machine generally only needs 3-4 kg
pressure to heat the temperature to a maximum of 350°C. Since the temperature
of the steam depends on the pressure, when there is a difference in position,
there is a difference in pressure and a difference in temperature. The
steam-heated plywood hot press is prone to temperature differences and uneven
heating, which affects the quality of the plywood. The heat transfer oil used
in the electric heating heat transfer oil furnace has good heat transfer
performance, and the temperature is uniform and stable, and there will be no
temperature difference.

How
the race label machine works?

For
different products, one of its heating rates can actually be selected. Its
titanium alloy indenter can ensure the average temperature, rapid temperature
rise, and prolong the service life. The pressure head also adopts a horizontal
and thick design to ensure the average pressure of the components. And also has
a digital display pressure gauge, which can be preset in the pressure range.
The principle of the race label machine is also the principle of using the
pulse heating of the indenter. The surface of the welding head is specially
designed. The resistance of the welding surface is very small, and the current
will continuously change the voltage and current to a level of heat conduction
in the cross-section with the smallest resistance. The oil and electric heaters
are safe, and the temperature and temperature differences are even. In order to
meet the heating requirements of the race label machine, the boiler pressure is
greater than 13kg. The heat transfer oil and electric heater usually only need
3-4 kg pressure, and the temperature can be heated to the maximum of 350
because the temperature of the steam depends on the pressure. When the location
is different, there is a pressure difference, and there is also a difference in
temperature. The heat-conducting oil heater is easier to heat than the boiler,
and the automatic temperature control can advance the press in advance to
stabilize the pressing temperature. Because there are many hidden dangers in
the boiler, it needs to be inspected once a year, and a special boiler room is
set up for special operation, which virtually increases the cost of the
enterprise.

3.
Improve production efficiency and reduce enterprise costs. The race label
machine is easy to operate, and the automatic temperature control can heat the
press in advance to stabilize the temperature of the press. The race label
machine has good stability, and it also has a great effect on improving the
quality of the product. Under the current market economy situation, the race
label machine industry is actively trying to reduce production costs and
improve product quality. The transforsteam heating race label machine into electric
heating race label machine have proven to be an effective way.

Work
advantage of race label machine

1.
According to statistics, about 20% of the heat in steam heating is wasted.
However, the electric heating race label machine heat conduction oil circulating
heating will not cause unnecessary heat loss. The thermal efficiency of the
electric heating oil mold temperature machine can reach 90%, which saves
energy. The heating of the hot press is achieved by heating the heat transfer
oil through the heating tube of the electric heating oil mold temperature
machine. Unlike steam heating, it needs to be continuously exhausted to heat
up, resulting in a lot of heat waste.

2.
Electric heating oil mold temperature machine has high safety and uniform
temperature. The temperature difference of the electric heating oil type mold
temperature machine is plus or minus 1℃. In order to meet the
requirements of the race label machine, the boiler pressure must be more than
13 kg, while the electric heating oil type mold temperature machine only needs
3-4 kg pressure to heat the temperature. Up to 300°C. Since the temperature of
the steam depends on the pressure, when there is a difference in position,
there is a difference in pressure and a difference in temperature. The steam-heated
hot press is prone to temperature differences and uneven heating, which affects
the quality. Electric heating oil type mold temperature machine uses heat
transfer oil with good heat transfer performance, the temperature is uniform
and stable, and there will be no temperature difference.

3.
Improve production efficiency and reduce enterprise costs. Compared with boiler
heating, the electric heating oil mold temperature machine is simple to
operate, and the automatic temperature control can heat the press in advance to
stabilize the temperature of the press. As there are many hidden safety hazards
in boilers, annual inspections are required, and special boiler rooms are set
up to be operated by dedicated personnel. This virtually increases the cost of
the enterprise. Because the electric heating oil mold temperature machine has a
uniform temperature and good stability, it also has a great effect on improving
product quality. Under the current market economy situation, the entire
industry is actively trying to reduce production costs and improve product
quality. The transformation of steam-heated presses into electric-heated
oil-type mold temperature machines has proven to be an effective way.

4.
The electric heating oil type mold temperature machine has high thermal
efficiency and saves more energy.

The
race label machine cleaning

The
race label machine are widely used in many fields such as wood production and
processing, decoration, building materials, etc. We must pay attention to
timely maintenance during use, so that there will be no problems when using
race label machine, especially cleaning.

After
using the race label machine, be sure to check to ensure that there will be no
problems when you use it next time, and the race label machine needs to be
cleaned frequently. If the race label machine is not cleaned in time, a lot of
dust will appear on the surface of the race label machine. This dust will cause
a lot of damage to the race label machine.

In
short, the race label machine must be checked after use, which leads to the
problem of the race label machine. Proper cleaning and maintenance of the race
label machine can improve work efficiency.

The race label machine supplier

MASCOON is focused on providing the best seamless solutions to our
clients. We specialize in supplying kinds of seamless bonding machines, folding
machines, gluing machines, hot air seam sealing machines, ultrasonic cutting
machines, label printing machines, label cutting machines, etc. Welcome to
contact us via: sales@mascoonsewing.com.

(Analysis of the advantages of using electric heating to conduct heat in the race label machine)