Trending

Deriphat 160C CAS 14960-06-6

The liquid is yellow and transparent, with a 29-31% content (the rest being water). It has good solubility within the pH ranges of 2.4 or >4.2. Deriphat 16C CAS 14960 06 6: Deriphat 160C, a mild detergent, is able to degrease, clean, and have opti…

More>>

Polyoxypropylene Glycerol Ether CAS 25791-96-2

Non-volatile liquid oil, colorless or yellow, that is soluble with benzene (and other aromatic solvents), acetone (and other solvents), but not water. Polyoxypropylene glycol ether: The liquid is colorless to yellow, non-volatile, oily, and not…

More>>

Polyoxyethylene(20)sorbitan monopalmitate CAS 9005-66-7

The HLB value is 15.5. It is an emulsifier that is used for wetting, foaming diffusion, and other processes. About Polyoxyethylene(20)sorbitan monopalmitate: The liquid is yellow or orange, viscous and slightly bitter. It's soluble with water, eth…

More>>

Polyglyceryl-3 Dioleate CAS 79665-94-4

A viscous liquid that is light yellow or slightly yellow, with a HLB of approximately 45. Polyglyceryl-3-dioleate: A viscous liquid that is light yellow or slightly yellow, with a HLB of approximately 45. It is a global trusted brand Polyglycer…

More>>

Sorbitan monostearate CAS 1338-41-6

Sorbitan monostearate (also known as sorbitan monostearate) is a food ingredient prepared by esterifying stearic acids and sorbitol. About Sorbitan monostearate: The Ministry of Health of the People's Republic of China released the National Food S…

More>>

Lauramidopropyl hydroxy sulfobetaine CAS 13197-76-7

It exhibits both cationic and anionic properties. It has low temperature stability, good compatibility, and excellent foaming and foam stability. Lauramidopropylhydroxy sulfobetaine, CAS 13197-76-7. This product has a better resistance to hardwate…

More>>

Sodium lauroyl sarcosinate CAS 137-16-6

It is mild, has a rich foam, and has good foam stabilization. It can be mixed with different surfactants. About Sodium Lauroyl Sarcosinate CAS 137-16-6 It is mild, has a rich foam, and is foam stabilized well. It's compatible with various surfacta…

More>>

Sodium Lauroamphoacetate CAS 156028-14-7

This product is an amphoteric mild surfactant with low irritation and good foam strength. About Sodium Lauroamphoacetate CAS156028-14-7 It is cationic in acidic conditions and can shield the skin by protecting Anions. Product Performance of th…

More>>

Lauramidopropyl Betaine CAS 61789-40-0

It has good solubility and compatibility; it has good foaming and thickening properties, and the compatibility can improve the softness, conditioning and low temperature stability of washing products; it has good hard water resistance, antistatic pro…

More>>

Polyglyceryl-2 Dioleate CAS 60219-68-3;67965-56-4

HLB of approximately 3.5. Emulsification of the liquid, dispersion and stability, as well as defoaming. Polyglyceryl-2 Diaoleate is a dioleate of polyglyceryl-2. Emulsification, dispersion and stability. It is a global trusted brand Polyglycery…

More>>

Cocoamidopropyl hydroxy sulfoBetaine CAS 68139-30-0

It is resistant to both acidic and basic conditions, and it has a better tolerance to hard water. CocoamidopropylhydroxysulfoBetaine, CAS 68139-30-0. It is compatible with washing products and can improve their softness, antistatic properties and…

More>>

Sorbitan trioleate CAS 26266-58-0

Sorbitan trileate is composed of three esters: two dehydrated sorbitols and one dehydrated sorbitol. Sorbitan trileate: Sorbitan trioleate, sorbitol is the raw material. Through dehydration, closed-loop formation, hydrophobic sorbitol, then esteri…

More>>

Related news

Polyglyceryl-3 Dioleate CAS 79665-94-4

A viscous liquid that is light yellow or slightly yellow, with a HLB of approximately 45. Polyglyceryl-3-dioleate: A viscous liquid that is light yellow or slightly yellow, with a HLB of approximately 45. It is a global trusted brand Polyglycer…

More>>

AI predicts the impact of a wide range of material properties to break down previously impenetrable walls on the molybdenum disilicide elements

Ai predicts the impact of a wide range of material properties to break down previously impenetrable walls on the molybdenum disilicide elements Spectral techniques Energy loss near edge structures (ELNES) and X-ray near-edge structures (XANES) are us…

More>>

Main Performance of Foam Concrete

Foam concrete has a low density. In practical application, the density grade of ordinary foam concrete is 300 kg/m3~1200kg/m3.…

More>>

50kva dry-type transformer: comprehensive analysis from design to application

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Magnesium Diboride MgB2 Powder CAS 12007-25-9, 99%

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%