High Quality Water-Based Boron Nitride Emulsion

About Water Based Boron Nitride Emulsion Water Based Boron Nitride Coating. Water-based coatings have excellent lubrication properties and are easy to remove. The high-temperature bonding process and matching high purity BN powder are what create this coating. The combination of high-purity boron dioxide particles with an inorganic binder creates a superior formulation that can produce a fluid, continuous coating on the surface. This allows for excellent adhesion. Also known as the boron nutride lubricant or boron coating.
Boron Nitride coating, an inert organic high-temperature grease material that doesn't bond with or infiltrate molten iron, is an inert lubricating agent. The coating protects ceramic vessels and other refractory materials from direct contact with the molten zinc, magnesium, or zinc alloy. This can greatly enhance this type of utensil. Life.
Hexagonal boron Nitride suspension is highly thermally conductive. You can apply it directly to any hot surface, regardless of whether or not you have impregnated molten metallic. It does not react to metal, glass, or molten sal. Boron nitride coateds can be used in a liquid that is suitable for brushing. The concentration of the coating can then be adjusted with water until it's suitable for spraying or dipping. If you are interested in purchasing Water-Based Boron Nitride Emulsion, please send us an inquiry.

Properties Water-Based Boron Nitride Emulsion:
Water-based Boron Nitride Emulsion does not pollute the environment or cause harm to human health. Non-toxic, no odor. Boron Nitride coating is heat resistant up to 400-1700. This coating is water resistant, resists salt spray, organic solvents, and has a long service life.

How Water Based Nitride Emulsion is made?
Use a gentle brush to apply the paint. You can dilute the paint with distilled water if it is necessary to discolor it.
Spray method: A spray gun, or another similar tool with 50-60psi (0.335-0.42MPa) is used to spray the paint. Mix the paint well before spraying. Use distilled water to dilute the paint if it is necessary.
Dip coating technique: Use distilled water to dilute the solution if necessary. After two dips it should be dried for forty minutes at 80 degrees Celsius.

Water Based Boron Nitride Emulsion
The boron nitride-emulsions are widely used in the aerospace, military, and petroleum industries. They can be used for high-temperature steampipe, chimney flue and heat exchanger.
Boron Nitride Emulsion is suitable for use in the following fields: aluminum, magnesium, zinc, other alloy casting, gravity/low -pressure casting, forging and powder metallurgy.
Boron Nitride Emulsion can be used on the casting table, distribution, and laundries. It also protects mold from corrosion. life;
Fine impurities are prevented from getting into the molten material by the boron-nitride formulation. It greatly improves the product's quality.
Boron nitride Emulsion provides excellent lubricity in high temperature environments and has an exceptional anti-oxidation capability. Even at extreme high temperatures it maintains its unique non-stick, antisticking, anti-corrosion and antioxidation properties.
Other than protecting various refractory material, boron-nitride-emulsions have outstanding anti-chemical and antiadhesion properties in other fields.
It is impossible for most molten and salt metals to make the boron nutride emulsion liquid wet.
Boron nitride Emulsion resists molten and light-metal scum.
Very good separation/unusual color in boron-nitride Emulsion.
The Boron Nitride Emulsion is used to extract solidified metal.

Technical Information of Water-Based Boron Nitride Emulsion: