For 3D printing powder manufacturing, it is titanium rod or an alloy of titanium.

The Metal Alloy Titanium Rod for Making 3D Printer Powder:
These items are used for: Medical use, aircraft and ship components

Standard of execution

Ti Titanium Bars And Titanium Alloy Barrs for Powder Production in Additive manufacturing (GB/T38973-2010)

Permissible size deviation:

Bar diameter deviations are allowed to be +-0.1mm

There is a maximum deviation from the bar length allowed of +-5 mm. A small bar length less than the nominal (10100) is acceptable, but it is not greater than 5%.

Each end of the bar should always be cut flat. The cutting angle should not exceed 4mm.
Maximum bending distance of bar is 0.7mm/m

Appearance quality:

Clean the surface of bars. There should not be any oxide scales, cracks or folding. All local imperfections on the bar's surface must be eliminated and cleaned. Maximum depth shall not exceed permissible deviation.
It is permitted for the bar's surface to not exceed half the diameter deviation due to individual small scratches, indentations or other defects.

Transportation & Payments:

Steel Alloy Titanium Rod To Make 3D Printer Powder Properties
Other Titles	Titium rod
	N/A
Compound Formula	Ti
Molecular Weight	N/A
Appearance	N/A
Melting Point	N/A
Solubility In Water	N/A
Density	N/A
Purity	N/A
Size	Individualized
Boling Point	N/A
Specific Heat	N/A
Thermo Conductivity	N/A
Thermal Expansion	N/A
Young's Module	N/A
Exact Mass	N/A
Monoisotopic	N/A
Titanium Rod To Make 3D Printing Powder Safety & Health Information
Safety Notice	N/A
Hazard Statements	N/A
Flashing Point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety statements	N/A
RTECS #	N/A
Transport Information	N/A
WGK Germany	N/A

Inquiry us