SLS Nylon Powder PrintingNylon sintering (selective laser sintering) is a project that uses spread powder sticks to tile a thick layer of powders, such as 3D printed metal powders, on parts. It is heated below the powder melting temperature instead of at a specified temperature.
Material: nylons, fibers and nylons

SLM Metal 3D Printing
Metal sintering can be described as a selective laser sintering. It is the process of using a powder stick to spread a thin layer on a molded part, then heating it until well below a metal powder sintering temperature.
Materials: aluminum alloy, stainless steel die steel, titanium alloy, etc

SLA Laser photocuring process flow
Under the control of the computer, scan along the liquid surface according to the requirements of the section contour. Under the computer's control, focus the laser beam on the liquid surface and scan it according to the section contour. This will cure the resin along the scanned area, resulting in a resin sheet with the section contour. The table is then lowered a thin layer to cover the cured resin sheet with a fresh liquid resin to perform a second laser scanning curing. The newly-cured layer is then adhered to the previous one and so forth until the whole product is formed.
( Tech Co., Ltd. ) is an experienced 3D metal powders producer with more than 12 years in the chemical products research, development and manufacturing industry. Contact us to send an inquiry if you are interested in high-quality 3D printed metal powders.

Inquiry us