High Purity Magnesium Silicide Mg2Si Powder CAS 22831-39-6, 99%

Magnesium Silicide is the most stable component in the MgSi binary. It is known for its high melting point and hardness as well as high elastic modulus. Purity: 99%
Particle Size: 5-10um

Magnesium Silicide Mg2Si Powder :
Magnesium Silicide is an organic compound that is made up of silicon and magnesium. It has the chemical formula Mg2Si with a molecular weight of 76.71. Cubic crystal in cyan, or light purple. The melting point at 1102°C is the relative density 1.94.
Magnesium silicide does not dissolve in cold water but will decompose in hot. The silica can be totally decomposed by heating it up to 1200°C under hydrogen flow. For the alkali solution, it is stable. Hydrogen and silane can be produced by their decomposition. Mg2Si, the stable compound in the MG-Si binary, has a high melt point, high hardness. High-elastic modus properties make it a narrow-bandgap n-type semiconductor materials. These are used to manufacture optoelectronics and energy devices. Mg2Si has an entire structure that belongs to the facial cube lattice. Its space group is FM3M and its group number is 225. The lattice constant A = 0.6391nm. The crystal structure shows that each Si atom is in (0, 0, 0, 0) and forms a facial cubic structure of a long A. The MG atom, located in the (0.25, 0.25, 0.25) location, is found at the center of the tetrahedron consisting of Si atoms. It forms an unfilial structural of the edge length (A / 2) Magnesium Silicide is a narrow-gap semiconductor. While the conductivity of the crystals is n-type, it can also be doped with Ag or Ga, Sn, Li, and possibly Li, at high levels. Send an inquiry for the most current price to purchase Magnesium Silicide Sg2Si Powder bulk.

Magnesium Silicide, Mg2Si powder:
Magnesium silicide (CAS 22833-39-6) powder has a high melting temperature, high corrosion resistance.

Technical Parameter Magnesium Silicide Mg2Si powder:
Name of the product MF Purity Particle Size Melting Point Density The color of the sky
Silicide magnesium Mg2Si 99% 5-10um 1102 1.94 g/cm3 black

Chemical composition of Magnesium Silicide Powder Mg2Si:
Mg2Si Mg Si C P Fe S
>99% Balance 36% 0.09% 0.02% 0.25% 0.005%

It is simple. Silicide for Magnesium Mg2Si Powder produced?
Silica powder has a particle size of 180. Magnesium powder is 100g. Research has revealed that silicide magnesium's optimal conditions for reaction are 600°C, 4 hr, silica powder with a particle diameter of 180, cooling at 10°C/min, good product quality and more than 98% magnesium silicide.

Magnesium Silicide Mg2Si Powder :
Magnesium Silicide is used often to create aluminum alloys. This contains around 1.5% magnesium sulicide.
To produce a series of aluminum alloys, 6000 series with as much as 1.5% Mg2Si magnesium silicide can be used. It is possible to harden the alloy of this group and create the Guinier PRESTON zone or a fine precipitate. This will increase the strength of your alloy.
The principal electronic use of MG2Si's MG2Si can be found in its thermoelectric generator.
Magnesium silicides can be used primarily to make other silicides.
It is used for the production of MgSin2 powder. This ingredient is necessary for the production of non-oxide clay powder.
An by-product of silicide magnesium silicide

Shipping Magnesium Silicide Rg2Si Powder
There are many packing options available that depend on the amount of magnesium silicide, Mg2Si.
Packing of Magnesium silicide, Mg2Si powder: You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Delivery of magnesium silicide Mg2Si in powder form: The payment receipt will be used to send the order by mail, air or express.

Magnesium Silicide Properties

Other Titles dimagnesium silicide, dimagnesium monisilicide,
MgSi, Mg2Si powder
22831-39-6
Compound Formula Mg2Si
Molecular Weight 76.7
Appearance Gray Black Powder
Melting Point N/A
Boiling Point N/A
Density 1.94 g/cm3
Solubility of H2O N/A
Exact Mass 75.94701

Magnesium Siicide Safety and Health Information

Signal word Danger
Hazard Statements H261
Hazard Codes F
Risk Codes 14/15
Safety statements N/A
Transport Information UN 2624 4.3/PG2

Inquiry us

NEXT Silicide Powder

Our Latest Products

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

Copper oxide chemical formula: CuO. Copper oxide is a black copper oxide with a slightly amphoteric, and slight hygroscopic chemical formula. The molecular mass relative to the element is 79.545. Its density is 6.96.9g/cm3 and its melting point at 10…

High Quality Water-Based Boron Nitride Emulsion

A water-based, organic high-temperature lubricating product is the water-based Boron Nitride Emulsion. It doesn't bond with or infiltrate molten metallic liquids and it can protect surfaces of refractory material or ceramic utensils. About Water Ba…

High Purity Calcium Silicide CaSi2 Powder CAS 12013-56-8, 99%

Calcium silicide (also known as calcium diilicide) is a chemical formula that is CaSi2. CaSi2 calcium silicide powder is used to make steelmaking deoxidation. Purity: 99%Particle Size: 5-10um Calcium Silicide CaSi2 Pulp : Calcium silicide (als…

0086-0379-64280201 brad@ihpa.net skype whatsapp