High Purity AlN Ceramic Powder Injection Molding Components
The aluminum nitride will not corrode in molten, other molten metals or gallium arsenide. It is resistant to corrosion of the molten iron.
About
AlN Ceramic Powder Injection Molding Components
:
Chemical formulation for aluminium nitride
AIN.
Aluminum Nitride
The covalent bond compound is an atomic structure that belongs to the diamond-like, hexagonal Nitride and wurtzite crystal types. They come in a variety of colors, including off-white, toxic, non-toxic and white.
AlN Aluminum nitride
At room temperature, stability is up to 2200 Its strength decreases as you increase temperature. It's heat-resistant and has high thermal conductivity. This crucible is great for melting aluminum or pure iron, and it can also be used to make them. It is strong against molten metal erosion. It can be used to make an electrical insulation. Aluminium nitride has great dielectric properties. It is likely to play an important role in an electric system. It's also an ideal component of an electric system as it has excellent dielectric properties.
aluminum nitride coating
By putting a protective film on the surface of gallium arsenide, it is protected from ionization during Annealing
Trusted around the world
AlN Ceramic Powder Injection Molding Components
Source
. We can answer your questions about the latest.
Aluminum nitride
Prices
Anytime.
AlN Ceramic Microspheres Product Performance of Aluminum Nitride AlN
AlN powder-molding components for ceramic powder are of excellent quality and very affordable price. You can make them in high-complexity shapes and large quantities.
AlN Ceramic Powder injection Molding Components Features:
Extremely high thermal conductivity
High strength
Excellent accuracy
Superior insulation
You can customize complex shapes
Resistance to plasma
Specification: AlN ceramic powder injection moulding components
Properties
|
Tr-C210
|
Tr-C170
|
Density expressed in grams/cm3.
|
3.33
|
3.32
|
Temperature conductivity, W/m*K
|
210
|
170
|
Bending Strength (MPa)
|
300
|
410
|
Insulation (KV/mm)
|
27
|
31
|
Dielectric
|
8.9
|
8.8
|
CTE (11-6).
|
4.9
|
4.6
|
What is AlN Ceramic Puinjection Molding Components ?
Al powder-nitride ceramics can be prepared by direct nitriding
You can prepare Al powder by directly nitriding. This is the best way to produce AlN powder. In this method, aluminum powder is heated in nitrogen. At 800-1200° Celsius, aluminum powder reacts to nitrogen to form aluminum nitride.
It has numerous advantages such as easy availability of raw materials, low cost, and minimal side effects. These benefits aren't without drawbacks. The aluminum particles develop a layer of nitride over the surfaces in the early stages. It prevents Nitrogen from further absorption, which results in lower yields. This is an exothermic reaction of aluminum with nitrogen. This is why the reaction between aluminum and Nitrogen happens quickly. AlN powder will self-sinter. Agglomeration will be formed, making the powder particles even smaller.
Aluminum nitride is prepared using a variety of methods, including Al2O3 Carbothermal Reduce, High-Temperature Self-spreading Synthesis and high-energy Ball Milling.
Applications AlN Ceramic powder Injection molding components -
1. Aluminium nitride has a high purity level and small particle size. The powder is also very active. This is the primary raw material that's used in high-temperature aluminum-nitride ceramic composite substrat.
2. The thermal conductivity of the Aluminium Nitride clay substrate is high and it has a very low expansion coefficient. It is a suitable substrate for integrated circuits of large scale.
3. Aluminum nitride has a harder hardness than traditional alumina. This ceramic material is unique and wears well. However, it's too expensive to be used in areas that are very worn.
4. You can use the heat resistance (thermal shock resistance) and melt erosion resistance of AIN ceramics for making GaAs crystals. You can use its optical properties for infrared window applications. The aluminum nitride foil is also a suitable high frequency piezoelectric component and large-scale substrate to integrated circuits.
5. Aluminium nitride resists heat and corrosion. However, it can easily be eroded with alkaline solution. Exposure to humid air results in the formation of an oxide layer. This can be used as a casting material, crucible, or for melting lead, silver, and aluminum. AIN ceramics could be substituted for toxic berylliumoxide ceramics used in electronics.
AlN Ceramic powder Injection Molding Components Storage Conditions
The damp reunion will affect AlN ceramic powder injection molding components. The dispersion of the components can be affected as well as their effects on use. It is important to keep AlN ceramic powder inject mold components dry with a vacuum bag. Avoid stress.
AlN Powder Injection Moulding Components: Shipping and packing
There are many options for packing depending on the amount of AlN ceramic powdered-injection molding parts.
AlN ceramic powder molding components packaging, vacuum Packaging, 1kg/bag 25kg/barrel oder as required
Shipment of AlN ceramic powder-injection mold components: Once payment has been received, can be sent by sea, air and express.
Nanotechnology Co. Ltd., a worldwide trusted supplier and manufacturer high-quality chemical products, is known for its 12 year-old history of providing Nanomaterials (boride, graphite. sulfide. 3D printing powders.
For high quality Aluminium Ceramic Pulsed Injection Moulding Parts please feel free to contact us. (brad@ihpa.net)
All-N ceramic powder injection molding components Properties
|
Additional Titles
|
Aluminium nitride
|
|
24304-00-5
|
Compound Formula
|
AlN
|
Motility
|
40.9882
|
Appearance
|
From white powder to pale powder
|
Melting Point
|
2200 degC
|
Boiling Point
|
2517 degC (dec.)
|
Density
|
2.9% to 3.3g/cm3.
|
Solubility H2O
|
N/A
|
Electrical Resistance
|
10-12 10x 10x O.m
|
Poisson’s rate
|
0.21 bis 0.31
|
Particular Heat
|
780 J/kg-K
|
Thermo Conductivity
|
80 to 200 W/mK
|
Thermal Expansion
|
4.2 to 5.4 um/mK
|
Young’s Modular
|
330 GPa
|
Exact
|
40.9846
|
Monoisotopic
|
40.9846
|
Safety & Safety Information
Comments
|
Danger
|
Hazard Statements
|
H314-H335
|
Hazard Codes
|
Xi
|
Risk Codes
|
36/37/38
|
Security statements
|
26-37/39
|
RTECS #
|
N/A
|
Transport Information
|
N/A
|
Germany
|
3
|
Inquiry us