Air Entraining Agent in Concrete

The ability to inject large numbers of small air bubbles throughout concrete mixers, to decrease bleeding, segregation, workability, and improve overall concrete quality, is known as an "air-entraining agent".

Description An Air Training Agent Agent for Air-entraining The ability to mix concrete with a lot of tiny, evenly distributed air bubbles. It helps to decrease the amount of bleeding and segregation. concrete mixture It will increase workability and dramatically improve frost resistance. concrete admixtures .

What's an air entraining device?
The vast majority Air entrain agents These are anionic surfactants. At the water-air interface the hydrophobic groups is directed toward the air. The hydrophobic layer of hydrated particles is formed when the concrete mixture is mixed. The directional adsorption layers of these air bubbles are the same as their charge. They repel each other, and they can be evenly distributed.
The anionic air-entraining substances can also be used to prevent bubbles bursting. They are absorbed onto the bubble film by calcium salt precipitation, which is found in high calcium cement.

Technical Parameters of the air entraining agents
Articles Main component Appearance Density(g/cm3) pH (1 % water solution) 20 viscosity(20,Sp2,100rpm)
Standard Surfactant for alkyl ether anionics You can choose from colorless or yellowish liquid
1.03+-0.02
6.0-8.0
1.21~1.48
300-1500


Characteristics of an air entraining agent
1. You will be amazed at its remarkable properties of uniform, long-lasting air bubbles.
2. Concrete can be made more workable and easier to pump.
3. This inhibits segregation as well as water secretion.
4. Enhances resistance to freeze-thaw and durability.
5. Reducing slump losses
6. You can use it to make concrete for various projects, including hydraulic, highway, port and culvert.
7. This mortar is compatible with it.

Use of concrete air entraining agent
1. Increase the usability of concrete mixes.
2. Significantly increase the concrete's frost resistance and impermeability.
3.Reduce concrete strength. The average concrete strength decreases by about 1% when its air content is increased by 4% to 6.6%. Conversely, it will lose 2% to 3.3% of its flexural strengths when its compressive strength increases by 1%.

Be aware Agent for air entraining
1. This product is not toxic and innocuous, it can be biodegradable. However, it cannot be eaten.
2. You should rinse it off with lots of water if it gets in your eyes.
3. A doctor should be consulted immediately if allergies are caused to any portion of the human body.

Inquiry us

PREVIOUS Concrete Admixtures

Sodium Hexametaphosphate

NEXT Concrete Admixtures

Our Latest Products

High Purity Meltblown Grade Chrome Oxide Granules Cr2O3 Powder, 99%

Non-ferrous metallurgy and building materials are all common uses for melted-blown chrome dioxide. Purity: 99%Particle Size 200mesh. About the Meltblown Grade Cr2O3 Granules Chrome Oxide Granules: Melt-blown chrome oxide You can also call it:…

0086-0379-64280201 brad@ihpa.net skype whatsapp