Hafnium Carbide HfC Powder CAS 12069-85-1

About Hafnium Carbide HfC Powder:
Hafnium carbide (HfC) is a compound of carbon and hafnium. Its melting point is about 3900°C, which is one of the most refractory binary compounds known. However, its oxidation resistance is very low, and oxidation starts at temperatures as low as 430°C.
Hafnium carbide is a black, gray, brittle solid; high cross-section absorbs thermal neutrons; resistivity 8.8μohm·cm; the most refractory binary material known; hardness 2300kgf/mm2; used in nuclear reactor control rods; It is prepared by heating HfO2 with oil soot under H2 at 1900°C-2300°C. It is used in the form of the crucible to melt oxide and other oxides.
An improved spark plasma sintering (SPS) device was used to synthesize ultrafine carbonized ha powder through the carbothermal reduction reaction of HfO2 at 1600°C. The synthetic powder has a fine particle size of about 125 nm and low oxygen content of less than 0.5% by weight. Except for Zr, the powder purity is> 99.9%; when it contains Zr impurities, the powder purity is 99.6%. Due to the low synthesis temperature, rapid heating/cooling rate and the current influence during the improved SPS process, intermediate reactions and particle growth are minimized. A relatively large amount of HfC powder can be synthesized by a new synthesis method (>175 g/day). After sintering the synthesized powder by SPS at 2300°C for 30 minutes under a pressure of 100 MPa, HfC ceramics with high relative density (>96%) were obtained. Feel free to send an inquiry to get the latest price if you would like to buy Hafnium Carbide HfC Powder in bulk.

Performance of Hafnium Carbide HfC Powder :

Hafnium Carbide Powder, a gray metallic solid, is the highest melting point of a single compound, and is a good material for the lining of high melting point metal smelting; it has a high melting point, high hardness, good high-temperature strength and corrosion resistance. Excellent characteristics such as better and lower thermal conductivity, can be used as an additive for cemented carbide, widely used in the field of cutting tools and molds; also suitable for rocket nozzle materials, can be used in the nose cone of rockets, often used in the aerospace field, It can also be used in nozzles, high-temperature linings, arcs or electrodes for electrolysis; it can also be used in nuclear reactor control rods.

Technical Parameter of Hafnium Carbide HfC Powder :

Hafnium Carbide Powder Chemical Composition (%)
meHfCTotal CFree.C
HfC Powder99min6.3min0.1max


How is Hafnium Carbide HfC Powder produced?
Hafnium carbide powder is prepared by reducing hafnium oxide with carbon at 1800 to 2000°C, in which a longer treatment time is required to remove all oxygen.
Hafnium carbide is a dark gray brittle solid. It can be prepared by heating a mixture of elements or by reacting hafnium tetrachloride with methane at 2100°C. In the large-scale production of pure zirconium for nuclear reactors, a sufficient amount of hafnium oxide or metal sponge can be obtained. On an industrial scale, hafnium carbide can be made from hafnium hydride sponge at 1500–1700°C or from oxidized ha at 2000–2200°C by vacuum carburizing in the presence of hydrogen. The resulting carbide contains almost the theoretical amount of carbon (6.30%°C) and up to 0.1% of free carbon (219). The obtained hafnium carbide is not a true stoichiometric compound, but only a carbon solution at a specific interstitial position of the face-centered cubic lattice.
Carbonization is inert to most reagents at room temperature but will be dissolved by hydrofluoric acid solution. Carbonization reacts exotherm with halogen at 250-500°C to form hafnium tetrahalide and forms hafnium oxide with oxygen above 500°C. In the presence of hydrogen, hafnium carbide will slowly lose some carbon at higher temperatures.

Application of Hafnium Carbide HfC Powder :
Hafnium carbide (HfC) has the highest melting point of any known binary alloy and therefore has many high-temperature applications. It is considered a candidate for extremely high-temperature applications, such as rocket nozzles and scramjet components. Carbonization can also be used in hard coatings, usually applied by processes such as plasma spraying. In addition, HfC structural foam can be made into high-temperature components or used as thermal insulation materials.
Hafnium carbide (HfC) whose melting point exceeds 3890°C is a refractory binary compound. HfC and NBC can also be used as refractory coatings in nuclear reactors. The mixed carbide Ta4HfC5 has the highest melting point at 4215°C.
1. Hafnium carbide can be used as an additive for cemented carbide, widely used in the field of cutting tools and molds;
2. Hafnium carbide applicable to the rocket nozzle material, can be used in the nose cone of the rocket, applied in the aerospace field, and can also be applied to the nozzle, high temperature lining, arc or electrode for electrolysis;
3. Hafnium carbide used in nuclear reactor control rods. It is an ideal metal for making nuclear reactor control rods;
4.Used to prepare ultra-high temperature ceramics;
5.Reactant for synthesizing hafnium-containing organometallic polymer;
6.For coating.

Storage Condition of Hafnium Carbide HfC Powder :
Hafnium Carbide HfC Powder should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.

Packing & Shipping of Hafnium Carbide HfC Powder :
It is packed in double plastic bags inside, which can be filled with argon in vacuum; it can be vacuumed and filled with argon for protection..
Hafnium Carbide HfC Powder  packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Hafnium Carbide HfC Powder  shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

Hafnium Carbide Properties

Other Names hafnium(IV) carbide, hafnium monocarbide, HfC powder
CAS No. 12069-85-1
Compound Formula HfC
Molecular Weight 190.5
Appearance Black Powder
Melting Point 3900 °C
Boiling Point N/A
Density 12.20 g/cm3
Solubility in H2O N/A
Exact Mass 191.946549
   
   

Hafnium Carbide Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

Inquiry us

Our Latest Products

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:Chemical composition:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…

0086-0379-64280201 brad@ihpa.net skype whatsapp