The World Bank expects global economic growth to slow significantly, from 5.5% in 2021 to 4.1% in 2022 and further to 3.2% in 2023. Growth in East Asia and the Pacific is expected to slow to 5.1 percent in 2022, reflecting the impact of China's economic slowdown, the report said. China's economic growth is expected to fall to 5.1% in 2022, close to potential growth, due to the ongoing impact of the COVID-19 pandemic and the Chinese government's tightening of regulations in certain sectors of the economy. The report said that the rapid spread of the Omicron variant means that the new crown epidemic is likely to continue to disrupt economic activity in the near future. In addition, decelerating growth in major economies, including the United States and China, will depress external demand in emerging markets and developing economies.
Slow economic growth has a huge impact on ZnS powder.

Introduction to Zinc Sulfide ZnS Powder
Zinc sulfide is an inorganic compound with the chemical formula ZnS. It is a white or yellowish powder that darkens when exposed to sunlight. It is stable in dry air, and for a long time in humid air, it will gradually oxidize to zinc sulfate. It is usually produced by the action of hydrogen sulfide with zinc salt solution. Zinc sulfide has an excellent fluorescence effect and electroluminescence function. In particular, nano zinc sulfide has a unique photoelectric effect, and it presents many excellent properties in the fields of electricity, magnetism, optics, mechanics, and catalysis.
 
Physicochemical Properties of Zinc Sulfide ZnS Powder
The chemical bond between Zn and S of zinc sulfide tends to be covalent. The crystal has three different configurations: low-temperature type, that is, sphalerite structure, which is abundant in nature, colorless cubic crystal, the Zn, S coordination number is 4, and the relative density is 4.10. At 1020℃ it will transfer to high-temperature type; High-temperature type, that is, wurtzite structure, colorless hexagonal crystal, Zn, S coordination number are 4, the relative density is 3.98, melting point is about 1700℃. It is a zinc sulfide high-temperature stable structure; High-pressure type, namely sodium chloride structure, Zn, S coordination number are 6, the relative density is 5.21. There is also an aqueous compound ZnS·H2O, which is a white powder with a relative density of 3.98 and a melting point of 1049℃. Zinc sulfide is insoluble in water and dilute alkali, and insoluble in acetic acid, but soluble in low concentrations of strong acids such as hydrochloric acid, which release hydrogen sulfide. The solubility product of zinc sulfide is similar to the K1·K2 value of hydrosulphuric acid, so the following equilibrium exists in dilute acid: 
Zn2+H2S=2H+ZnS 
It can be seen that in the highly acidic zinc salt solution, hydrogen sulfide gas cannot get zinc sulfide precipitation. In zinc salt solution, hydrogen sulfide gas is introduced, zinc sulfide precipitation can be obtained, but the precipitation is not complete. Using ammonium sulfide solution as precipitant, zinc ions in zinc salt solution can be precipitated into zinc sulfide completely, because ammonium sulfide solution is alkaline, the acidity of the system can be reduced. In industry, the above method should be used to isolate air.  White zinc sulfide darkens when exposed to light and is easily oxidized to zinc sulfate in air. Zinc sulfide can be used as a white paint pigment by itself or in combination with zinc oxide. Pure zinc sulfide does not emit light. If trace manganese, copper, and silver are added to zinc sulfide crystals as activators, they can emit different colors of fluorescent light after light irradiation, which is called fluorescent powder and is used to make fluorescent screens and luminous paint. Zinc sulfide is also used in leather, enamel, rubber, dye, and other industries. 
Zinc sulfide is corrosive and poisonous. It can irritate the skin. Operators should wear overalls and protective equipment. The workshop should be well ventilated. 
 

Zinc Sulfide ZnS Powder Properties
Other Names	ZnS powder, zinc sulphide
CAS No.	1314-98-3
Compound Formula	ZnS
Molecular Weight	97.45
Appearance	white to off-white powder
Melting Point	1830°C
Boiling Point	N/A
Density	4.1g/cm3
Solubility in H2O	insoluble
Exact Mass	N/A

 

Zinc Sulfide ZnS Powder CAS 1314-98-3
 

Preparation Methods of Zinc Sulfide ZnS Powder
Double decomposition method: Add zinc sulfate solution to the reactor, and slowly add ammonium sulfide for double decomposition reaction under stirring. Zinc sulfide and ammonium sulfate will be generated, then remove ammonium sulfate by filtration, and then by evaporation concentration, cooling crystallization, centrifugal separation, zinc sulfide will be produced
ZnSO4+(NH4)2S---ZnS+(NH4)2SO4 
 
Applications of Zinc Sulfide ZnS Powder
1. Can be used as analytical reagents, phosphor matrix, photoconductor material; Or used for dyes, coatings, pigments, glass, curing oil manufacturing, etc.
2. Zinc sulfide is widely used in the production of infrared windows, fairing, and infrared optical elements. It has characteristics of high purity, insoluble in water, moderate density, and easy processing. Zinc sulfide has good refractive index uniformity and consistency. It has good image transmission performance in the band range of 8-12μm, but some of it begins to absorb after 10um. In the middle infrared band, the transmittance is higher, and the absorption and scattering are enhanced along with the shorter wavelength. Zinc sulfide has strong resistance to the harsh environment, and the high hardness and fracture strength are twice that of Zinc Selenide.
Tough front optics for zinc sulfide thermal imaging systems for infrared windows and thermal bands (8 to 14μm).
Single-crystal zinc sulfide is available but not common. The scattering is very low in the usual spectral range. It can be used as a high-power laser device under the condition of strictly controlling the bulk absorption and internal structural defects of the material and adopting the polishing technology with small damage degree and the coating technology with the highest optical quality. 
Zinc sulfide oxidizes significantly at 300℃, exhibits plastic deformation at about 500℃, and dissociates at about 700℃. For safety reasons, zinc sulfide windows should not be used above 250°C in a normal atmosphere.
3. Used for optical coating target, X-ray screen, the luminescent dial by adding a trace amount of radium or neothorium salt, TV screen, and pigment for paint.
 
Main Supplier of Zinc Sulfide ZnS Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including ZnS powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality zinc sulfide powder, please feel free to contact us and send an inquiry. ([email protected])
 

Due to the limited total amount of traditional energy, people have a huge demand for cleaner and greener new energy alternatives. Now, the emergence of graphene is unlocking the possibility of its application in the energy field, which can create a greener, more efficient, and sustainable future. Here Francesco Bonaccorso, Deputy Director of Innovation at the Graphene Flagship Program, explains how his researchers have developed a series of initiatives to bring graphene from the lab to the commercial market. Graphene has become a research hotspot for new materials in the 21st century. Graphene has been adopted by many industries, the most notable of which are healthcare and key material applications.

The development of graphene has brought huge fluctuations in the demand for ZnS powder, and the demand for ZnS powder will continue to grow in the future. You can contact us for the latest news on ZnS powder.

Inquiry us