High Purity 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder

Risk aversion plunged on the positive news of the Russia-Ukraine talks. After several days of rising oil prices, the price of precious metals continued to fall. Domestic futures markets remain stable for the time being.

Back in international markets, WTI crude futures briefly dipped below $100 a barrel, while Brent crude hit its lowest intraday level in nearly two weeks. Spot gold briefly fell below $1,900 an ounce. Comex gold futures closed down 1.1 percent at $1,918.4 an ounce. Comex silver futures closed down 1.14 percent at $24.91 an ounce. "Recently, crude oil prices have been extremely sensitive to changes in geopolitical news." Traders believe that the current oil price is still in the broad impact, Ukraine will still be a premium in the case, although the market further decline, but should not be too pessimistic, it is recommended to wait and see for the time being. The Ukrainian premium is still there and there will be some volatility in the Cobalt Chromium Molybdenum market.

About 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder:
CoCrMo alloy (CoCrMo) is a kind of cobalt base alloy, is also commonly known as Stellite (Stellite) alloy, is a kind of wear resistance and corrosion resistance of cobalt base alloy.The original cobalt base alloy is a cobalt chromium binary alloy, later developed into a cobalt chromium tungsten ternary composition, and then later the development of cobalt chromium molybdenum alloy.Cobalt-chromium-molybdenum alloys are alloys with cobalt as the main component and contain a considerable amount of chromium, molybdenum, and a small amount of nickel, carbon, and occasionally iron. Cobalt and chromium are two basic elements of cobalt-based alloys while adding molybdenum can produce finer grains and higher strength after casting or forging.Cobalt-chrome-molybdenum alloys are basically divided into two categories: CoCrMo alloy and ConicrMo alloy;
1. The first category is CoCrMo alloys, usually cast products; The improvement of the technology greatly improves the comprehensive mechanical properties of the material.
2. The other type is ConicrMo alloys, which are usually (hot) forged and precision machined. Cast CoCrMo alloys have been used in dentistry for decades and are currently used to make artificial joints, while forged ConicrMo alloys are used to make heavy joints that can withstand heavy loads such as knees and hips. TRUNNANO is a trusted global 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder supplierFeel free to send an inquiry about the latest price of Cobalt Chromium Molybdenum CoCrMo Powder at any time.

Cobalt Chromium Molybdenum Characteristics: The powder is with high powder sphericity, smooth surface, less satellite balls, low oxygen content, uniform particle size distribution, good fluidity and high bulk density and tap density.

Cobalt Chromium Molybdenum Applicable Process: The powder can be used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), spray coating, welding and other processes.

Cobalt Chromium Molybdenum Applicable Equipment: The powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

How is 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder Produced?
Water atomization method, it is the use of medium frequency induction furnace melting materials alloy, the melt leakage by only a few millimeters in diameter eye forming metal liquid column, in the process of falling by more than surrounded by high-pressure water metal liquid column, a shock to turn it into a metal powder, and then again through the water, powder separation device, will collect the wet powder dry can. Using radiofrequency (rf) plasma spheroidization system for water atomized powder was prepared by the irregular cobalt chromium molybdenum alloy powder for further processing, after a series of processes such as plasma zone melting solidification, ultimately morphology rules (≧ 90%), high rate, high sphericity and good performance of high packing density, micron grade spherical cobalt chromium molybdenum alloy powder.
 
Applications of 3D Metal Printing Cobalt Chromium Molybdenum CoCrMo Powder :
Depending on the composition of the alloy, CoCrMo alloy can be made into welding wire, powder for hard surfacing, thermal spraying, spray welding and other processes, but also can be made into casting and forging parts and powder metallurgy parts.
CoCrMo alloys are particularly susceptible to work hardening and therefore cannot be manufactured in the same way as other metals, requiring vacuum precision casting instead. Controlling the mold temperature can control the grain size of the casting. The formation of coarse grains at higher temperatures will reduce the strength, but it will also precipitate large and far apart carbides and reduce the brittleness of the material.

CoNiCrMo alloy is one of the promising forging cobalt-base alloy, originally called MP35N, when under stress, can be in the water of the sea (containing chloride ions) has high corrosion resistance, cold working can increase the strength of the alloy, but cold work have considerable difficulty, especially in manufacturing large devices, such as hip handle, only hot forging was suitable.
CoNiCrMo alloy wear-resistant properties of forging and casting CoCrMo alloy has good fatigue resistance and the advantage of high tensile strength, so it is suitable for application in long life and do not need or stress fatigue fracture, hip place of artificial joints, for example, for the implant is deeply embedded in the femoral bone marrow catheter this difficult and costly in terms of operation, This advantage is very important.

The elastic modulus of cobalt-based alloys does not change with the maximum tensile strength, which ranges from 220 to 234 GPa and is higher than that of other materials such as stainless steel.
CoCrMo alloy powder is mainly used for 3D printing of biomedical materials such as teeth, human scaffolds and artificial joints.

Cobalt Chromium Molybdenum Specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)



Storage Condition of Cobalt Chromium Molybdenum CoCrMo Powder:
The damp reunion will affect CoCrMo powder dispersion performance and using effects, therefore, cobalt chromium molybdenum CoCrMo powder should be sealed in vacuum packing and stored in cool and dry room, the cobalt chromium molybdenum CoCrMo powder can not be exposure to air. In addition, the cobalt chromium molybdenum CoCrMo powder should be avoided under stress.

Packing & Shipping of Cobalt Chromium Molybdenum CoCrMo Powder:
We have many different kinds of packing which depend on the cobalt chromium molybdenum CoCrMo powder quantity.
Cobalt chromium molybdenum CoCrMo powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Cobalt chromium molybdenum CoCrMo powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com


Cobalt Chromium Molybdenum Properties

Other Names CoCrMo Super Alloy; Cobalt-Chromium-Molybdenum
CAS No. 105525-46-0
Compound Formula CoCrMo
Molecular Weight 206.9
Appearance Gray to Black Powder
Melting Point N/A
Boiling Point N/A
Density 8.4 g/cm3
Solubility in H2O N/A
Electrical Resistivity N/A
Poisson's Ratio 0.29
Tensile Strength 780 to 1280 MPa (Ulitmate)/ 480 to 840 MPa (Yield)
Thermal Conductivity 13 W/m-K
Thermal Expansion 12 µm·m-1·K-1
Vickers Hardness N/A
Young's Modulus 210 to 250 Gpa
   
   

Cobalt Chromium Molybdenum Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

The COVID-19 pandemic has affected economies and chemical companies in many countries around the world. Measures such as extending holidays and resuming work were taken to control the development of the epidemic, and the normal operation of some chemical enterprises was also affected to some extent.

We provides high quality Cobalt Chromium Molybdenum with reasonable price. “In order to feedback to old customers, the company is still in full operations to provide Cobalt Chromium Molybdenum with competitive price.” said Olina, the sales manager.

Chemical Cobalt Chromium Molybdenum, feel free to contact us.

Inquiry us

Our Latest Products

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:Chemical composition:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…

0086-0379-64280201 brad@ihpa.net skype whatsapp