If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
1. Splashing or brushing
When it comes to rough surface areas such as concrete, concrete mortar, and upraised concrete structures, splashing is much better. When it comes to smooth surfaces such as stones, marble, and granite, cleaning can be made use of.
Prior to usage, the base surface area should be carefully cleaned up, dust and moss need to be tidied up, and cracks and holes need to be sealed and fixed ahead of time and loaded tightly.
When utilizing, the silicone waterproofing agent need to be applied 3 times up and down and horizontally on the dry base surface (wall surface, etc) with a tidy farming sprayer or row brush. Remain in the middle. Each kilo can spray 5m of the wall surface. It ought to not be revealed to rainfall for 24-hour after construction. Building ought to be stopped when the temperature level is listed below 4 ℃. The base surface area have to be completely dry throughout building and construction. It has a water-repellent effect in 24 hr at room temperature level, and the impact is much better after one week. The healing time is much longer in winter months.
2. Add concrete mortar
Clean the base surface, tidy oil spots and floating dirt, remove the peeling layer, etc, and secure the splits with versatile products.
Vendor
TRUNNANO is a supplier of nano materials with over 12 years experience in nano-building energy conservation and nanotechnology development. It accepts payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you want to know more about sodium silicate and water, please feel free to contact us and send an inquiry.
In power systems, transformers are vital devices that regulate voltage and ensure stable current transmission. Among them, 50kva dry-type transformers are widely used in various power demand situations due to their high efficiency, safety and economy…
Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high thermal conductivity, and radiation absorption. It is used widely in the aerospace and military industries. About Metal Alloy 18.5g/cm3 Polished Tungs…
Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the petrochemical, electricity, electronics and energy indus…